EN USER MANUAL | Section 1 IT MANUALE D’USO | Sezione 1 POWERED COLUMN SYSTEM SISTEMA ATTIVO A COLONNA
TABLE OF CONTENTS 1 | INTRODUCTION | Introduction 3 2 | Installation 3 3 | Description 4 3.1 | Inputs & controls 4 3.2 | Power supply section 6 3.3 | B-TWIG 12CS kit 7 4 | Instructions for system assembly and disassembly 7 5 | Troubleshooting 10 6 | Technical specifications 11 7 | Notes 22 Thank you for choosing a A.N.
| DESCRIPTION 1 2 3 4 5 LEFT OUT/THRU XLR-M balanced output to link the IN LEFT input signal to another active system. 6 COMBO LEFT INPUT Left channel balanced input with Combo (XLR-F + Unbalanced 6.35mm – 1/4” - jack) connector. 7 COMBO RIGHT INPUT Right channel balanced input with Combo (XLR-F + Unbalanced 6.35mm – 1/4” - jack) connector. 8 RIGHT OUT/THRU XLR-M balanced output to link the IN RIGHT input signal to another active system.
3.2 | POWER SUPPLY 3.3 | B-TWIG 12CS KIT The kit, supplied of its carrying bag, is composed of two column elements: a stand (A element) and a speaker (B element). Both are equipped with the slide locking system, which allows the coupling and the quick release of the elements that make up the system, ensuring a safe perfect functionality. The included cover protects the internal contacts from moisture and dust in case of non-use of the system.
ASSEMBLY DISASSEMBLY • Place the subwoofer on a flat surface (fig.1) • Remove the protective covers from the subwoofer and A-B elements locking mechanism (fig.2) • Fix the A element, by sliding it into the locking mechanism (fig.3), fixing is achieved by means of a spring button placed behind the fastening mechanism • Repeat step 3 to fix the element B to the top of the system (fig.4) and complete the installation (fig.
| TECHNICAL SPECIFICATIONS System type Active column system Subwoofer (B-TWIG 12S) 1 x 12” custom speaker - 2.5” V.C Array speaker (B-TWIG 12CS) 8 x 2.75” Neo custom speakers - 0.75” V.
INDICE 1 | INTRODUZIONE | Introduzione 13 2 | Installazione 13 3 | Descrizione 14 3.1 | Ingressi & controlli 14 3.2 | Alimentazione 16 3.3 | Kit B-TWIG 12CS 17 4 | Istruzioni di montaggio e smontaggio del sistema 17 5 | Soluzione dei problemi 20 6 | Caratteristiche tecniche 21 7 | Note 22 CONTENUTO DELL’IMBALLO • 1x Sub attivo B-TWIG 12S • 1x Kit B-TWIG 12CS comprendente: n.1 elemento di sostegno n.1 diffusore a colonna n.
3 | DESCRIZIONE 1 2 3 4 5 LEFT OUT/THRU Uscita XLR-M bilanciata per il rilancio del segnale in ingresso LEFT IN ad un altro sistema amplificato.
3.2 | ALIMENTAZIONE 3.3 | KIT B-TWIG 12CS Il kit, fornito dell’apposita custodia di trasporto, è composto da due elementi a colonna: uno stativo (elemento A) e un diffusore (elemento B). Entrambi sono dotati del meccanismo di connessione a slitta, che permette l’aggancio e lo sgancio rapido degli elementi che compongono il sistema, assicurandone la perfetta funzionalità in tutta sicurezza.
INSTALLAZIONE DISINSTALLAZIONE • Collocate il subwoofer su una superficie piana e priva di ogni dislivello (fig.1) • Rimuovete i coperchi di protezione dal meccanismo di aggancio del subwoofer e dagli elementi A-B (fig.2) • Assicurate l’elemento A facendolo scorrere nel meccanismo di aggancio a slitta (fig.3), il fissaggio avviene per mezzo di un pulsante a molla collocato dietro al meccanismo di aggancio. • Ripetete l’operazione per fissare l’elemento B nella parte superiore (fig.
6 | CARATTERISTICHE TECNICHE PROBLEMA SPIE SOLUZIONE Tipo Sistema a colonna amplificato Assenza di suono o suono troppo basso LED Power spento Assicuratevi che l’apparecchio sia collegato correttamente alla presa di corrente Subwoofer (B-TWIG 12S) Cabinet Bass reflex 1 x Altoparlante custom da 12” - 2.5” VC Diffusore a colonna (B-TWIG 12CS) 8 x Altoparlanti custom al neodimio da 2.75” - 0.
7 | NOTES/NOTE 6 | NOTES/NOTE www.ant-sound.com ENG The information contained in this manual have been carefully drawn up and checked. However no responsibility will be assumed for any incorrectness. This manual cannot cover all the possible contingencies which may arise during the product installation and use. Should further information be desired, please contact us or our local distributor. A.E.B.
©2017 A.E.B. Industriale Srl | Printed in China | REV 1.2 A.E.B.