User Manual

ENGLISH
B-TWIG 12 | User manual
10 11
User manual | B-TWIG 12
System type Active column system
Subwoofer
(B-TWIG 12S)
1 x 12” custom speaker - 2.5” V.C
Array speaker
(B-TWIG 12CS)
8 x 2.75” Neo custom speakers - 0.75” V.C
Average dispersion Horizontal 120°
Frequency response 45Hz - 20kHz
SPL - MAX 123 dB
Amplier Class D
Peak Power (LF+HF) 2000 W
Crossover 24dB/Oct @ 200Hz
I/O connectors
LINE IN: 2 x Combo XLR-F + Jack 6,35mm (1/4”)
OUT/THRU: 2 x XLR-M
Controls Master Level, Subwoofer Level, Phase 0°/180°
Power supply 200-240V~ 50-60Hz
Fuse T4A L 250V~
Fastening mechanism Custom slide connector with automatic lock
Cabinet 12mm plywood
Surface nishing
Scratch-resistant coating with high mechanical
resistance
B-TWIG 12S B-TWIG 12CS
Dimensions (W x H x D)
370 x 603 x 505mm
14.6” x 23.7” x 19,9”
105 x 707 x 100mm
4.1” x 28.8” x 3.9”
Weight 19 kg – 41.2 lbs 4.6 kg - 10.1 lbs
6 | TECHNICAL SPECIFICATIONS5 | TROUBLESHOOTING
PROBLEM LEDS SOLUTION
No sound or very
low sound level
Power LED
turned off
Make sure the device is properly
connected to the mains outlet
Power LED turned on,
but low MASTER VOL
Raise MASTER VOL level
Distortion
ON/LIMIT
LED lit red
ON/LIMIT
LED lit green
Lower MASTER level
Check the source level
Check proper connection between
subwoofer and A/B elements
Booming sound Lower SUBWOOFER level
Harsh sound
Raise SUBWOOFER level
Lower MASTER level
Lower frequencies
small attenuation
Try reversing subwoofer
phase by pressing the PHASE switch
EMI CLASSIFICATION
According to the standard EN55103 this equipment is designed and suitable
to operate in E3 (or lower E2, E1) electromagnetic environments.