User Manual

ENGLISH
iROLLER 10 | User manual
4 5
User manual | iROLLER 10
A
C E
B
2 | INSTALLATION
iROLLER 10 is equipped with:
A | Top handle
B | Telescopic handle
C | Transport wheels
D | Pole mounting standard hole
E | Access to the battery compartment
3 | DESCRIPTION
1312111097 842
1
53 6
3.1 | INPUTS & CONTROLS
1 MIC 1 IN
Balanced microphone input (combo 6.35mm Jack/XLR).
You may also use a microphone cable with unbalanced 6.35mm jack.
2 CH 1 LEVEL
This knob adjusts the level of the microphone channel, turn it
to the right to raise the level, to the left to decrease it.
3 INS/MIC 2 IN
6.35mm (1/4”) jack unbalanced microphone or line input.
4 CH 2 LEVEL
This knob adjusts the level of CH2, turn it to the right to raise the level, to
the left to decrease it.
5 CD/TAPE IN
Unbalanced stereo input with RCA sockets for CD player or tape recorder.
Internally the signal is summed in mono.
6 AUX
Unbalanced stereo input with 3.5mm mini-jack for any external devices
(smartphones, tablets, PCs, etc.).
7 CH 3 LEVEL
This knob adjusts the level of CH3, turn it to the right to raise the level,
to the left to decrease it.
8 MP3/AUX SWITCH
Selects CH 3 signal source. Pressing the switch RCA or 3.5mm mini-jack
signal is selected, releasing the switch MP3 player is selected.
9 LOW
Low frequency equalizer. Use this control to boost or cut mid-low frequencies.
10 HIGH
High frequency equalizer. Use this control to boost or cut mid-high frequencies.
11 ECHO
This knob adjusts CH 1 echo volume, turn it to the right to raise the level,
to the left to decrease it.
12 MASTER VOL
Speaker master volume control.
13 LED POWER
This LED is lit when the unit is plugged to mains or powered by internal
battery, and the power switch is ON.