User Manual

ENGLISH
iROLLER 10 | User manual
12 13
User manual | iROLLER 10
conrmwiththePLAY/PAUSE button. The display shows “BT NOT
LINK”, and now it’s possible to connect another Bluetooth
®
device to
your MP3 player.
RECALL OF RECENTLY CONNECTED DEVICES
To reconnect the last Bluetooth
®
device connected to MP3 player,
press the MODE button for about 1 second, while the MP3 player in
in Bluetooth
®
mode. Then using the and buttons choose
“Recentlyreconnection”andconrmwiththePLAY/PAUSE button.
DELETE PAIRED INFO
You can disconnect an already synchronized Bluetooth
®
device by
pressing for 1 second the MODE button with the MP3 player is in the
Bluetooth
®
mode, then select “Delete paired info” with the and
buttons and press the PLAY/PAUSE buttontoconrmyourchoice.
DEVICE INFORMATION
With the MP3 player in the Bluetooth
®
mode, press for about 1 second
the MODE button, then with the and buttons select “Device
Information” and press the PLAY/PAUSE buttontoconrmyour
choice.
Once synchronized, the device is recognized by your external devices
with its proper name “iROLLER 10”.
EXIT - EXITING THE MENU
1. To exit the menu, using the
and buttons, search for “Exit”
andconrmtheprocedurewiththePLAY/PAUSE button.
2. Exit from the menu is automatic after eight seconds and the display
will show the main screen.
4.4 | REMOTE CONTROL
2
1
6
3
4
7
5
1. Hold down the MODE button for about 1 second. Using the and
buttons,searchfor“ChangeDevice”;conrmthechoicepressingthePLAY/PAUSE
button.
Now using and buttons you can select the signal source between “SD
Card”,forSDCard,or“UDISK”,forUSBstick.ConrmthechoicepressingthePLAY/
PAUSE button.
2. Briefly pressing the MODE button, the MP3 player changes the signal source (SD
card slot/USB stick slot/Bluetooth
®
). The display shows the currently activated
signal source.
EXIT – EXITING THE MENU
1. To exit the menu, using the
and buttonssearchfor“Exit”andconrm
the procedure with the PLAY/PAUSE
button.
2. Exit from the menu is automatic after eight seconds and the display will show
the main screen.
4.3 | Bluetooth
®
MENU
Following instructions are relative to Bluetooth
®
mode menu. For SD card and USB
stick operations, please refer to section 4.2.
MP3 player is equipped with Bluetooth
®
,allowingtoplaybackaudiolesfromanother
Bluetooth
®
device (e.g. a smartphone) on your iRoller 10, provided that the distance
between these two devices is within 10 meters.
To synchronize and connect the MP3 player with a Bluetooth
®
device use the following
procedure:
1. Press briefly the MODE button until when the display shows
“BT NOT LINK”.
2. Activate Bluetooth
®
on your device to search the MP3 player.
3. In your smartphone or tablet list of found devices, select “iRoller 10” to synchronize
your device with the MP3 player.
4. After the synchronization, the MP3 player display shows the name of the external
device you have connected (e.g. your name set in the Smartphone’s memory). Once
connected you can start playing the tracks.
BT DISCONNECT – Bluetooth
®
DISCONNECTION
If you want to disconnect a Bluetooth
®
device to synchronize, for example, another
device to your MP3 player, press for about 1 second MODE with the MP3 player in
Bluetooth
®
mode. Using the and buttons choose “BT Disconnect” and