User Manual

ENGLISH
iROLLER 10 | User manual
14 15
User manual | iROLLER 10
 “ChangeDevice”andconrmtheselectionwiththePLAY/PAUSEbutton.
Now using the PREV and NEXT buttons you can choose as signal source
between“SDCard”,fortheSDcardor“UDISK”,fortheUSBstick,conrm
your choice with the PLAY/PAUSE button.
2. Briefly pressing the button MODE the MP3 player changes the signal
source (SD/USB/Bluetooth
®
). The display shows the activated signal source.
Play Mode – Playback mode
1. To exit the menu, using the PREV and NEXT buttons search for “Exit”
andconrmtheprocedurebypressingthePLAY/PAUSEbutton.
2. Exit from the menu is automatic after 8 seconds and the display will
show the main screen.
7 MODE
1. Briefly pressing the MODE button, the MP3 player changes the signal
source (SD card/USB stick / Bluetooth
®
).
The display shows the currently activated signal source.
2. Press this key for about 2 seconds to turn ON/OFF the MP3 player.
You can turn off and turn on the MP3 player only by the infrared remote
control, not by the device itself.
NOTE: CHANNEL (CH-, CH+) and PICK SONG are disabled.
4.4.2 | Bluetooth
®
REMOTE CONTROL OPERATIONS
1 PLAY/PAUSE
Press the PLAY/PAUSE button to start track playback. Pressing again this
button, the MP3 player switches to pause and playback is suspended.
2 VOL-/VOL+
These buttons adjust MP3 player volume (from 0 up to 15).
Press VOL- to lower the volume, press VOL+ to increase the volume.
3 PREV/NEXT
Press briefly the PREV button to select the previous track, or press NEXT
to select the next track. Holding down either button you activate fast
rewind or fast forward.
4 ENTER
Press the ENTER key to enter the menu to choose the Bluetooth
®
menu.
Operation and settings are described in the chapter “Bluetooth
®
MENU”.
4.4.1 | SD/USB REMOTE CONTROL OPERATIONS
Direct the remote control towards you r device infrared interface.
Operating range is about 8 meters (26.2 ft).
1 PLAY/PAUSE
Press the PLAY/PAUSE button to start track playback. Pressing again this button,
the MP3 player switches to pause and playback is suspended.
2 EQ
You can recall seven different preset memories (Normal, Pop, Rock, Jazz, Classic,
Country, Low bass) by pressing the button repeatedly.
3 VOL-/VOL+
These buttons adjust MP3 player volume (from 0 up to 15).
Press VOL- to lower the volume, press VOL+ to increase the volume.
4 PREV/NEXT
Press briefly the PREV button to select the previous track, or press NEXT to select
the next track. Holding down either button you activate fast rewind or fast forward.
5 TRACK DIRECT SELECTION
Use the number keys 0 to 9 to directly select a track.
Example: If the track you wish to listen is #18, shortly press the button 1
 rstandthenthebutton8(thedisplaybrieflyshows“0018”).
6 ENTER
Press the ENTER key to enter the menu to choose the equalizer, play mode
and the signal source.
EQ - Equalizer
To select one of seven preset equalizer press the ENTER key, then using the PREV
andNEXTkeyssearchfor“Eq”,nallypressthePLAY/PAUSEbuttontoconrm.
Now you can activate one of the seven equalizer presets using the PREV and NEXT
keys and select the desired one with the PLAY/PAUSE button.
Play Mode – Playback mode
You can choose among six different playing modes: Normal/Random/Browse/All/
Repeat One/Repeat Folder. Press the ENTER key, then using the PREV and NEXT
keys,select“PlayMode”andconrmtheselectionwiththePLAYPAUSEbutton.Now
press the PREV and NEXT keys to recall the six available play modes and choose
the one you want, by pressing the PLAY/PAUSE button.
Change Device – Source selection
MP3 player signal source selection:
1. Press the ENTER button and use the PREV and NEXT keys, search for