User Manual

ENGLISH
ANTMIX Series | User manual
28 29
SERIES
User manual | ANTMIX Series
PROBLEM LED SOLUTION
No effects heard
DFX MUTE activate
Turn off the DFX MUTE
button, anc check send
levels of all the channels.
DFX MUTE
deactivated
Check the levels of DFX TO
MAIN (6FX) or DFX RETURN
(8FX e 12FX).
Distortion PEAK LED lit.
Attenuate the level of the
inputs and/or MAIN MIX.
Check you haven't
connected a line signal into
a MIC socket.
Confused sound
Make sure you haven't
simultaneously activated
more sound sources in the
same channel
Check if you activated
microphones LOW CUT lter
4 | TROUBLESHOOTING
PROBLEM LED SOLUTION
No sound or
very low sound level
Power LED turned off.
Make sure the device is properly
connected to the mains outlet.
Power LED turned on, but
MAIN MIX low.
Raise MAIN MIX level.
Power LED turned on,
MASTER VOL raised, but
MUTE button depressed.
Raise MUTE button.
Power LED turned on,
MASTER VOL raised, but
input channel LEVEL low.
Check connections between
sources and mixer. Raise
channel LEVEL.
Power LED turned on,
MASTER VOL raised,
LEVEL raised, but +48V off.
Activate +48V power for
microphones deserving it.
12 FX LED - Power
LED turned on, MAIN
MIX raised but, signal
addressed to GR1-2
Press the L-R button.