EN user manual | Section 1 IT manuale D’USO | Sezione 1 PLL DIVERSITY UHF WIRELESS SYSTEMS SISTEMI RADIO UHF PLL DIVERSITY
Series PACKAGE CONTENT 1 | Introduction 4 2 | Description 4 2.1 | Receiver 5 2.2 | Handheld microphone 6 2.3 | Beltpack transmitter 7 3 | Tips to better use the system 8 4 | Troubleshooting 9 5 | Technical specifications 10 6 | Notes 22 G D E C F A B START 16 HDM Version with Handheld mic • 1x START 16R receiver with built-in antennas - A • 1x START 16M handheld dynamic microphone - B • 1x External power adapter - C • 1x Unbalanced 6,35mm (1/4”) jack audio cable - D • 2x 1.
Series 1 | Introduction 2.1 | RECEIVER - START 16R Thank you for choosing a A.N.T – Advanced Native Technologies – product! In our START 16 “PLL Diversity” wireless systems we have put our passion and our technological background gained over the years, to offer products that meet your needs, maintaining the quality over time. START 16 wireless systems operate in UHF band with 16 channels (frequencies). You may choose the operating frequency via buttons or via infrared using ASC feature.
Series REAR PANEL 1 2 2 Power ON and battery status indicator GREEN: Transmitter activated (ON), charged batteries. RED: Immediately replace the batteries. WARNING: battery life is about 8 hours, but it may vary according to the usage conditions. 3 3 ON/OFF Press this button for 3” to turn on or off the wireless handheld microphone. 4 Batteries compartment To access the battery compartment unscrew the lid counterclockwise, and screw the lid clockwise to close it.
Series the synchronization, the receiver’s display is lit steadily on the selected channel (frequency). • Place the receiver in such a way that is far from a wall and that is at least 1 meter (about 3 feet) above the floor. 4 Mini XLR-M input Connected to this input the supplied PH-90 Headset or the signal of other sound sources.
Series 5 | Technical specifications RECEIVER - START 16R BELTPACK TRANSMITTER - START 16B Type Diversity Modulation FM Modulation FM Frequencies range 863-865MHz Frequencies range 863-865MHz Channels 16 Channels 16 Input DC powered Mini-XLR for PH-90 Headset Antennas x 2, adjustable and fixed on front panel Frequency response 60Hz - 15.000Hz (±3dB) Frequency response 60Hz - 15.
Serie CONTENUTO DELL’IMBALLO 1 | Introduzione 14 2 | Descrizione 14 2.1 | Ricevitore 15 2.2 | Radiomicrofono a mano 16 2.
Serie 2.1 | RICEVITORE - START 16R 1 | INTRODUZIONE Grazie per aver acquistato un prodotto A.N.T – Advanced Native Technologies! Nei radiomicrofoni “PLL Diversity” START 16 abbiamo profuso la nostra passione ed il nostro background maturato nel corso degli anni per offrirvi un prodotto che soddisfi le vostre esigenze e mantenga la sua qualità nel tempo. I sistemi radio START 16 operano nella banda UHF e dispongono di 16 canali (frequenze).
Serie 11 AntennE Collocate le antenne in posizione verticale per una buona ricezione del segnale. PANNELLO POSTERIORE 1 2 3 2 Indicatore Power ON e stato della batteria VERDE: Trasmettitore acceso (ON), batterie cariche. ROSSO: Sostituite immediatamente le batterie. ATTENZIONE: a durata delle batterie è di circa 8h ma varia a seconda delle condizioni di utilizzo del trasmettitore. 3 ON/OFF Premete questo pulsante per 3” per accendere o spegnere il radiomicrofono.
Serie 4 Ingresso mini XLR-M Collegate a questo ingresso l’Headset PH-90 in dotazione o il segnale di altre sorgenti sonore. 5 Indicatore Power ON e stato batteria VERDE: Trasmettitore acceso (ON), batterie cariche. ROSSO: Sostituite immediatamente le batterie.
Serie 5 | CARATTERISTICHE TECNICHE RICEVITORE - START 16R TRASMETTITORE BELTPACK - START 16B Tipo Diversity Modulazione FM Modulazione FM Gamma di frequenze 863-865MHz Gamma di frequenze 863-865MHz Canali 16 Canali 16 Ingresso Mini-XLR con alimentazione per Headset PH-90 Antenne x 2, snodabili e fissate al telaio frontale Risposta in frequenza 60Hz - 15.000Hz (±3dB) Risposta in frequenza 60Hz - 15.
Serie 6 | NOTES/NOTE 6 | NOTES/NOTE www.ant-sound.com ENG The information contained in this manual have been carefully drawn up and checked. However no responsibility will be assumed for any incorrectness. This manual cannot cover all the possible contingencies which may arise during the product installation and use. Should further information be desired, please contact us or our local distributor. A.E.B.
©2017 A.E.B. Industriale Srl | Printed in China | REV 1.0 A.E.B.