User Manual

Antaira Industrial Ethernet Switches
LMX-0601G-SFP Series User Manual V1.1
5
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has
its own specific meaning, see below in Table 2.1.
LED Color Description
P1 Green
On Powerinput1is active
Off Powerinput1isinactive
P2 Green
On Powerinput2is active
Off Powerinput2isinactive
Fault
Green
On System is ready
Off
System is booting
Red
On Fault Alarm
Off
System is in normal state
Owner Green
On ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring Green
On Ring Network is active
Off
Ring Network is not active
LAN Port 1~ 5
(Left LED)
Green
On Connected to network, 1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 1~ 5
(Right LED)
Green
On Networking is active, 100/10Mbps
Flashing
Networking is active
Off
Not connected to network
Fiber Port 6
LNK/ACT
(SFP Slot)
Green
On Connected to Network
Flashing
Networking is active
Off
Not connected to network
Table 2.1
LED Indicators for LMX-0601G-SFP Series