User Manual

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.1

4. Hardware Installation

4.1 Installation Steps

This section will explain how to install Antaira’s LMX-0601G-SFP0 series: 6-port industrial gigabit

managed Ethernet switch with 5*10/100/1000Tx RJ45 ports, and 1*100/1000 SFP Slot;

12~48VDC power input.

Installation Steps

1. Unpack the industrial Ethernet switch from the original packing box.

2. Check if the DIN-Rail bracket is screwed on the industrial Ethernet switch.

 If the DIN-Rail is not screwed on the industrial Ethernet switch, please refer to the

DIN-Rail Mounting section for DIN-Rail installation.

 If you want to wall mount the industrial Ethernet switch, please refer to the Wall

Mounting section for wall mounting installation.

3. To hang the industrial Ethernet switch on a DIN-Rail or wall, please refer to the Mounting

Installation section.

4. Power on the industrial Ethernet switch and then the power LED light will turn on.

 If you need help on how to wire power, please refer to the Wiring the Power Inputs

section.

 Please refer to the LED Indicators section for LED light indication.

5. Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.

6. Insert one side of the RJ-45 cable into switch’s Ethernet port and on the other side into the

networking device’s Ethernet port, e.g. switch PC or server. The Ethernet port’s (RJ-45) LED

on the industrial Ethernet switch will turn on when the cable is connected to the networking

device.

 Please refer to the LED Indicators section for LED light indication.

7. When all connections are set and the LED lights all show normal, the installation is complete.