User Manual

Antaira Industrial Ethernet Switches
LMX-0601G-SFP Series User Manual V1.1
27
5.5.3.1 Scenario A – RPL Configured Architecture
Under scenario A, there are three major roles that are required to be configured within the
ERPS configuration.
Figure 5.20 – RPL-Configured Architecture
Caution: Before enabling any ERPS protocols on any of the Ring Nodes,
please DO NOT connect all switches to form a loop (ring) network
just yet. There should be at least one ring port left unplugged until all
nodes in the topology are ready.