User Manual

Antaira Industrial Ethernet Switches
LMX-0601G-SFP Series User Manual V1.1
48
5.12 System Warning
System warning function is very important for managing a switch. Users can manage the switch
by “Syslog”, “System Event Log”, and “Email Server” setup for Advanced Notice in any event type,
“Event Type Selection”, and “Fault Alarm” setting. By setting up all these system warning features,
users will receive the in advanced warning message through email, whenever any event occurs. It
definitely increases the flexibility and capability for the users to monitor the remote site network
and device statuses.
5.12.1 Syslog Setting
The SYSLOG is a protocol to transmit event notification messages across networks.
Terms Value Description
SYSLOG Mode
Disable: Disable SYSLOG.
Local Only: Log to local system.
Remote Only: Log to a remote SYSLOG server.
USB Only: Log and store SYSLOG data and warning
file to USB storage device through built-in USB Port;
and the file name is “message”
All: Log to all local server / USB port, and remote
SYSLOG server at the same time.
Notice that there is one log in local server or USB
port. If USB presented, it will log to USB storage.
Otherwise it logs to local server.
SYSLOG Server IP Address Insert remote SYSLOG server IP address.
Figure 5.52 – Syslog Setting Interface