User Manual

Antaira Industrial Ethernet Switches
LMX-0601G-SFP Series User Manual V1.1
51
5.12.4 Event Selection
Users can select any event type through the “Event Selection” interface, such as “System Cold
Start”, any ports’ “Link Up”, “Link Down”, “Link Up & Link Down” and send the system warning
massage to either SYSLOG or SMTP, or both at the same time. After the event selection, users
can click the “Apply” button to save changes.
5.12.5 Fault Alarm
When any selected fault event has occurred, the fault LED of the switch’s front panel will light up
and the electric relay will signal at the same time. Users can check the checkbox of any “Fault
Alarm” type, such as power failure, port link down or broken through the “Fault Alarm” setting
interface to trigger this function.
Figure 5.57 – Event Selection Setting Interface
Figure 5.58 – Event Selection Setting Interface