User Manual
Antaira Industrial Ethernet Switches
LMP-0601G-SFP Series User Manual V1.0
1
1. Introduction
Antaira Technologies’ industrial managed switches come with a pre-installed “user friendly” web
console interface, which allows users to easily configure and manage the units, whether one is using
a serial console and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or
simple network management protocols (SNMP).
1.1 Product Overview
Antaira’s LMX-0601G-SFP series is a 5-port industrial Gigabit managed Ethernet switch that is
embedded with 5*10/100/1000Tx Ethernet ports and 1*100/1000 dual rate SFP slot for fiber
connection. This series is a fully manageable industrial Ethernet switch with a pre-loaded Layer
2 network management web console that supports a low voltage redundant power input range
from 12~48VDC with a voltage booster. This product series is IP30 rated, DIN-rail mountable,
and has two wide operating temperature models for either a standard temperature range ( STD:
-10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also provides high
EFT and ESD protection for any industrial networking application within factory automation, ITS,
power/utility, water wastewater, and any other outdoor or harsh environment.
1.2 Product Software Features
Network Redundancy
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for
network redundancy
Network Management
Web UI based management, SNMP v1/v2, Serial Console
Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,
broadcast storm control, Diffserv
IEEE802.1q VLAN, port-based VLAN support
IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group
Supports RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, SSH/SSL,
TFTP.
Port Configuration
Status, statistics, mirroring, rate limiting, event syslog
Event Handling
Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP
trap and Fault Alarm Relay Output
Software Upgrade via TFTP and HTTP