User Manual

Antaira Industrial Ethernet Switches
LMX-0601G-SFP Series User Manual V1.1
74
7. Technical Specifications
Table 7.1 has the technical specifications for Antaira’s LMX-0601G-SFP series: 6-port industrial
gigabit managed Ethernet switch with 5*10/100/1000Tx, 1*100/1000 SFP Slot; 12~48VDC power
input.
Standards
IEEE 802.3 10Base-T 10Mbit/s Ethernet
IEEE 802.3u 100Base-Tx, 100Base-Fx, Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Fiber
IEEE 802.3x Flow Control for Full Duplex
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s MTP (Multiple Spanning Tree Protocol)
ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
IEEE 802.1q Virtual LANs (VLAN)
IEEE 802.1x Port based Network Control, Authentication
IEEE 802.1ad Stacked VLAN, Q-in-Q
IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
Switch
Protocol CSMA/CD,IGMPv1/v2,SNMPv1/v2,TFTP,SNTP,SMTP,RARP, Syslog
Data Process Store and Forward
Transfer Rate
14,880 pps for 10Base-T Ethernet port
148,800 pps for 100Base-TX Fast Ethernet port
1,488,000 pps for 1000Base-TX Gigabit Ethernet port
Packet Buffer 1Mbits
MAC Table 8K
Jumbo Frame 9.6
Flow Control IEEE 802.3x for full duplex mode, back pressure for half duplex mode
VLAN Groups 0 ~ 4094
IGMP Groups Up to 256
Port Interface
Ethernet (RJ45) Port
5*10/100/1000BaseTx ; auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Fiber Port
1*100/1000 (Dual Rate) SFP Slot
Wavelength
Refer to SFP Modules
RS232 Serial Console 1*RS232 in RJ45 connector with console cable, 115.2Kbps, 8,N,1
Configuration Backup 1*USB 2.0
Protection
Overload Current Present
Power Reverse Polarity Present
CPU Watch Dog Present
Network Cable 10BaseT: 2-pair UTP/STP Cat. 3,4,5 cable - EIA/TIA-568 100-ohm