Specification Sheet

LMX-0800 Series

Features

8-Port Industrial Managed Ethernet Switch, with

8*10/100Tx Ports

► Supports 8*10/100Tx RJ45 Ports

► Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS

(Recovery Time <50ms)

► Supports IPv4/IPv6, and DHCP Option 66/67/82

► Supports Modbus/TCP Protocol for Device Management and

Monitoring

► Configuration: Web Console, Telnet, CLI Command

► IGMP v1/v2 for Multicast Traffic Filtering

► System Warning Setting for Automatic Warning through E-

mail

► QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism

► IEEE802.1Q VLAN for Easy Network Planning

► Enhanced Network Security with IEEE802.1X, SNMP

v1/v2c/v3, HTTPS, and SSH/SSL

► Auto Warning by Exception through E-mail, Relay Output

► Operating Temperature Range: STD: -10° to 70°C, EOT: -

40° to 75°C

► 5-Year Warranty

Antaira Technologies’ LMX-0800 series is an 8-port industrial managed Ethernet switch that is embedded with

8*10/100Tx Ethernet ports. The LMX-0800 series is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a

user-friendly web management console design. It supports the ring network redundancy function using the market’s

open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time.

The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus

TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA

systems or control networks.

The LMX-0800 series is IP30 rated and DIN-rail mountable. There are also two wide operating temperature models for

either a standard temperature range (STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It

also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water

wastewater, oil/gas/mining, factory automation, security surveillance within transportation, ITS and any other outdoor or

harsh environment.

INTRODUCTION

DIMENSIONS

PAGE 1
LMX-0800 Series 8-Port Industrial Managed Ethernet Switch, with 8*10/100Tx Ports Features ► Supports 8*10/100Tx RJ45 Ports ► Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms) ► Supports IPv4/IPv6, and DHCP Option 66/67/82 ► Supports Modbus/TCP Protocol for Device Management and Monitoring ► Configuration: Web Console, Telnet, CLI Command ► IGMP v1/v2 for Multicast Traffic Filtering ► System Warning Setting for Automatic Warning through Email ► QoS (IEEE802.
PAGE 2
SPECIFICATIONS Protection Technology Standards IEEE 802.3 10Tx Ethernet IEEE 802.3u 100Tx Fast Ethernet IEEE 802.3x Flow Control for Full Duplex IEEE 802.3ad for Port Trunk with LACP IEEE 802.1d STP (Spanning Tree Protocol) IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) ITU-T G.8032/Y.1344 ERPS (Ethernet Ring Protection Switch) Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1x for Network Authentication IEEE 802.