Application Guide

[84]
Software User's
Manual
–
Version 3.0
Ethernet
Specify whether frames can hit the action according to their ARP/RARP protocol address space
(PRO) settings.
Setting Description
Factory
Default
0 ARP/RARP frames where the PRO is not equal to IP (0x800).
Any 1 ARP/RARP frames where the PRO is equal to IP (0x800).
Any Any value is allowed.
IP Parameters
The IP parameters can be configured when Frame Type IPv4 is selected.
IP Protocol Filter
Setting Description
Factory
Default
Any No IP protocol filter is specified.
Any
Specific
If you want to filter a specific IP protocol filter with this ACE, choose
this value.
A field for entering an IP protocol filter appears.
ICMP
Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for
defining ICMP parameters will appear. These fields are explained
later in this
manual
.
UDP
Select UDP to filter IPv4 UDP protocol frames. Extra fields for
defining UDP parameters will appear. These fields are explained
later in this
manual
.
TCP
Select TCP to filter IPv4 TCP protocol frames. Extra fields for
defining TCP parameters will appear. These fields are explained
later in this
manual.
IP Protocol Value
Setting Description
Factory
Default
0~255
When Specific is selected for the IP protocol value, you can enter a
specific value. The allowed range is 0 to 255. A frame that hits this
ACE matches this IP protocol value.
0
IP TTL
Specify the Time-to-Live settings for this ACE.
Setting Description
Factory
Default
zero
IPv4 frames with a Time-to-Live field greater than zero must not be
able to match this entry.
Any
non-zero
IPv4 frames with a Time-to-Live field greater than zero must be able
to match this entry.
Any Any value is allowed.