User Manual

Antaira Technologies - Industrial Ethernet Switches
LNX-1202G-10G-SFP User Manual V1.1
5
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has
its own specific meaning, see below in Table 2.1.
LED Color Description
Power 1 Green
On Power input 1 is active
Off Power input is inactive
Power 2 Green
On Power input 2 is active
Off Power input is inactive
Fault Red
On Power input 1 or 2 is inactive
Off Both power input 1 and 2 are active
Link Activity
(SFP Port)
Green
On Connected to the network
Flashing Networking is active with 10G
Off Not connected to the network
LAN Port 1 ~ 10
(Upper LED)
Green
On Connected to network, 1000Mbps
Flashing
Networking is active
Off Not connected to network
LAN Port 1 ~ 10
(Lower LED)
Green
On Connected to network, 10/100Mbps
Flashing Networking is active
Off Not connected to network
2.5 Ethernet Ports

RJ45 Ports (Auto MDI/MDIX):
The RJ45 ports are auto-sensing for 10/100/1000Base-Tx devices connections. Auto MDI/MDIX
means that the switch can connect to another switch or workstation without changing the straight-
through or crossover cabling. See the figures shown below for straight-through and crossover
cabling schematics.
Table 2.1