Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 LNX-2602G-SFP Series 26-Port Industrial Gigabit Unmanaged Ethernet Switch, with 24*10/100/1000Tx and 2* Gigabit Combo Ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP Slots) Version 1.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 © Copyright 2017 Antaira Technologies, LLC. All Rights Reserved This document contains information, which is protected by copyright. Reproduction, adaptation or translation without prior permission is prohibited, except as allowed under the copyright laws. Trademark Information Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 FCC Notice This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 Table of Contents 1. Overview ....................................................................... 1 1.1 Key Features ...................................................... 1 1.2 Package Contents .............................................. 2 2. Hardware Description ................................................. 3 2.1 Physical Dimensions .......................................... 3 2.2 Front Panel ............
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 1. Overview Antaira Technologies’ LNX-2602G-SFP industrial gigabit unmanaged Ethernet switch series features 24 Gigabit ports, two Gigabit combo ports with two 10/100/1000 RJ45 and two dual rate 100/1000Fx SFP slots for fiber or twisted pair connections.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 1.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 2. Hardware Description 2.1 Physical Dimensions Figure 2.1, below, shows the physical dimensions of Antaira Technologies’ 26-port industrial gigabit unmanaged Ethernet switch with 24*10/100/1000Tx and 2* Gigabit combo ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP slots). (W x D x H) is 440mm x 44mm x 200mm Figure 2.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 2.2 Front Panel The front panel of the 26-port industrial gigabit unmanaged Ethernet switch with 24*10/100/1000Tx and 2* Gigabit combo ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP slots). See Figure 2.2. Figure 2.2 LED for PWR LEDs for SFP LED for RJ45 1000Tx 10/100/1000Tx RJ45 Ports Combo Fiber Port – 100/1000Fx Network Speed Status LED for RJ45 10/100Tx Copper Port – 10/100/1000 Network Speed Status 2.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 2.5 Ethernet Ports RJ45 Ports (Auto MDI/MDIX): The RJ45 ports are auto-sensing for 10/100/1000Base-Tx devices connections. Auto MDI/MDIX means that the switch can connect to another switch or workstation without changing the straightthrough or crossover cabling. See the figures shown below for straight-through and crossover cabling schematics. RJ45 Pin Assignments (Figure 2.2 & 2.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 2.6 Cabling Twisted-pair segments can be connected with an Unshielded Twisted Pair (UTP) or Shielded Twisted Pair (STP) cable. The cable must comply with the IEEE 802.3u 100Base TX standard (e.g. Category 5, 5e, or 6, 6e). The cable between the equipment and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 2. Push down the metal clasp and pull the transceiver out by the plastic part as shown below in Figure 2.9. Figure 2.9 - Pull Out from the SFP Module 2.7 Wiring the Power Inputs Please follow the steps below to insert the power wire. 1. Insert the AC power cable into the universal AC socket as shown below in Figure 2.10. Figure 2.10 – AC Power Socket 2. To turn the power on, push the power switch.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 3. Mounting Installation 3.1 Rack Mounting The switch comes with a rack-mounted kit can be mounted in an EIA standard size, 19-inch rack. It can be placed in a wiring closet with other equipment. Perform the following steps to rack-mount the switch. 1. Position one plate to align with the holes on one side of the hub and secure it with the smaller plate screws.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 4. Hardware Installation 4.1 Installation Steps This section will explain how to install Antaira Technologies’ LNX-2602G-SFP series: 26-port industrial gigabit unmanaged Ethernet switch, with 24*10/100/1000Tx and 2* gigabit combo ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP slots). Installation Steps 1. Unpack the industrial Ethernet switch from the original packing box. 2.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 5. Network Application Figure 5.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 6. Trouble Shooting • Never use a non-compliant AC output voltage or it will burn the equipment. • Select the proper UTP or STP cable in order to construct the network. Use an Unshielded Twisted-Pair (UTP) or Shield Twisted-Pair (STP) cable for RJ45 connections: 100Ω Category 5e for 10/100/1000Mbps. Also be sure that the length of any twisted-pair connection does not exceed 100 meters (328 feet).
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 7. Technical Specifications Table 7.1 has the technical specifications for Antaira Technologies’ LNX-2602G-SFP series: 26port industrial gigabit unmanaged Ethernet switch, with 24*10/100/1000Tx and 2* gigabit combo ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP slots). Standards IEEE 802.3 10Base-T 10Mbit/s Ethernet IEEE 802.3u 100Base-Tx, 100Base-Fx, Fast Ethernet IEEE 802.
Antaira Technologies - Industrial Ethernet Switches LNX-2602G-SFP Series User Manual V1.0 Approvals IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), EMS IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC-61000-4-8 (Magnetic Field) IEC60068-2-32 (Free fall) Stability Testing IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) Green RoHS Compliant Compliance NEMA TS1 (ITS) Safety Certificate CE, FCC, UL61010-1 & UL61010-2-201 (Pending) Warranty 5 Years Table 7.
