User Manual

Antaira Technologies - Industrial Ethernet Switches
LNX-2602G-SFP Series User Manual V1.0
13
7. Technical Specifications
Table 7.1 has the technical specifications for Antaira Technologies’ LNX-2602G-SFP series: 26-
port industrial gigabit unmanaged Ethernet switch, with 24*10/100/1000Tx and 2* gigabit combo
ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP slots).
Standards
IEEE 802.3
10Base-T 10Mbit/s Ethernet
IEEE 802.3u
100Base-Tx, 100Base-Fx, Fast Ethernet
IEEE 802.3ab
1000Base-Tx Gigabit Ethernet
IEEE 802.3z
1000Base-X Gigabit Fiber
Switch
Property
Protocol
CSMA/CD
Data Process
Store and Forward
Flow Control
IEEE 802.3x flow control, back pressure flow control
Switch Architecture
Back‐Plane: Non‐Blocking Switching Fabric
Transfer Rate
14,880pps for 10Base-T Ethernet port
148,800pps for 100Base-TX Fast Ethernet port
1,488,000pps for Gigabit Ethernet port
Transmission Distance
Up to 100M
Transmission Speed
Up to 1000Mbps (Gigabit)
Memory Buffer
4Mbits
Jumbo Frame
9.6Kbytes
MAC Table Size
8K MAC Address
Port Interface
Ethernet (RJ45) Port
24*10/100/1000Tx, auto negotiation speed, full/half duplex mode, and
auto MDI/MDI-X connection
Gigabit Combo Port
2*10/100/1000Tx RJ45 and 2*100/1000 SFP Slots
Fiber Wavelength
Refer to SFP Modules
LED Indicator
Power
Ethernet Ports: On-Link/Flash-data transmitting
SFP: Link/Active
Network Cable
10Tx: 2-pair UTP/STP Cat.3,4,5 cable EIA/TIA-568 100-ohm (100m)
100Tx: 2-pair UTP/STP Cat.5 cable EIA/TIA-568 100-ohm (100m)
1000Tx: UTP/STP Cat.5/5E cable EIA/TIA-568 100-ohm (100m)
Mechanical
Characteristics
Housing
Metal IP40 protection
Dimension
440 x 44 x 200 mm (W x H x D)
Weight
Unit Weight: 6.2 lbs. Shipping Weight: 8.0 lbs.
Mounting
1U 19” Rackmount
Power
Requirement
Input Voltage
90-264VAC / 47-63Hz
Overload Current Protection
Present – Slow Blown Fuse
Power Consumption
24 Watts for system
Environmental
Limits
Operating Temperature
Standard: -10 to 70C (14 to 158F); EOT: -40 to 75C (-40 to 167F)
Operating Humidity
5% to 95% (Non-Condensing)
Storage Temperature
-40 to 85C (-40 to 185F)
Regulatory
EMI
FCC Part 15 Subpart B Class A, CE EN 55022 Class A