User Manual

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira LNP-0500 Industrial-Grade 5-Port PoE Unmanaged Fast Ethernet Switch, DIN-Rail Mount, -10 to 70°C Operating Temperature, Redundant 48 to 55 VDC Power Input, 5-Year Warranty

8

Wiring the Power Inputs

Please follow the steps below to insert the power wire.

Insert the positive and negative wires into the PWR1 (V1+, V1-) and PWR2 (V2+,V2-)

contacts on the terminal block connector.

Tighten the wire-clamp screws to prevent the wires from loosening.

Note



Use Copper Conductors Only, 60/75

°

C, Tighten to 5 lb in

 The wire gauge for the terminal block should range between 12 ~ 18

AWG.