Manualshelf

User Manual

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira LNP-0500 Industrial-Grade 5-Port PoE Unmanaged Fast Ethernet Switch, DIN-Rail Mount, -10 to 70°C Operating Temperature, Redundant 48 to 55 VDC Power Input, 5-Year Warranty
11121314151617181920
9
Wiring the Fault Alarm Contact
The fault alarm contact is in the middle of the terminal block connector as the picture
shows below. By inserting the wires, it will detect the fault status including power failure
or port link failure (managed industrial switch only) and form a normally open circuit. An
application example for the fault alarm contact is shown as below:
Note
Use Copper Conductors Only, 60/75
°
C, Tighten to 5 lb in
The wire gauge for the terminal block should range between 12 ~ 24
AWG
.