Owner`s manual

75MM BLOCKS SHACKLE
TO BRACKET, SWIVELS LOCKED
IN PARALLEL POSITION
SHOCK CORD PASSES THROUGH
BLOCK CENTRE OPENINGS AND
TIES OFF TO HOLD BLOCKS UPRIGHT
AND ALIGNED WHEN UNLOADED
LOCATED FOREWARD IN COCKPIT LOCKER,
VIEW IS LOOKING FORWARD AND INBOARD
LINES UP TO SHEET WINCH
PEDESTAL CLUTCHES ABOVE
LINES FROM STBD.
MAST BASE TURNING BLOCKS
LINES FROM THE STBD. MAST BASE
BLOCKS PASS UNDER BRACKET ANTI-CHAFE
BAR AND RUN AFT TO HALYARD WINCH PEDESTAL
LINES FROM THE PORT
MAST BASE BLOCKS PASS
THE BRACKET AND RUN
AFT TO HALYARD
WINCH PEDESTAL
T
R
O
U
G
H
C
E
N
T
R
E
BRACKET DH-04-06 BOLTS
TO DECK AND HULL MOULDINGS
HARKEN RECOMMENDS THAT THE BLOCKS BE
FREQUENTLY FLUSHED WITH FRESH WATER
TO REMOVE SALT DEPOSITS AND DIRT.
LUBRICATION WITH A NON-DIRT ATTRACTING
LUBRICANT LIKE HARKEN McLUBE MAY BE APPLIED.
INSPECT ASSEMBLY FREQUENTLY TO ENSURE
SHOCK CORD IS SOUND AND ALL SHEAVES ARE
ALIGNED AND FREE RUNNING
THIS IS A REGULAR MAINTENANCE ITEM!
ANTARES 44 DECK HARDWARE
TURNING BLOCK MAINTENANCE
SP-04-02, SHEET 2 of 3
SHEET WINCH BLOCK ASSEMBLY
ISSUED OCT. 20, 2009
FIRST VESSEL USED 4427
TC