User Manual

30
Attack Time
This control adjusts the speed with which SYBIL
Evo’s compressor responds to peaks in the signal
coming from the high pass filter. The range of the
control is from 3 milliseconds to 100 milliseconds.
Command (Mac)/Control (PC) click the control to
reset it to its default value of 10 milliseconds.
Release Time
This control adjusts the time it takes the
compressor’s gain to increase 6 dB after the
signal coming from the high pass filter drops
below the threshold. The range of the control is
from 3 milliseconds to 200 milliseconds.
Command (Mac)/Control (PC) click the control to
reset it to its default value of 20 milliseconds.
Usage Tips
•
SYBIL Evo functions solely as a mono
processor.
•
If the high pass frequency is set too low,
non-sibilant components of the signal will be
compressed and the vocal will have its highs
attenuated. If it is set too high, some sibilance
will still remain. The trick is to find that ideal
point where only the sibilance is affected.
When set correctly, you can’t tell that there is
processing going on. If you can hear something
happening, SYBIL Evo needs to have its
settings tweaked.