Specifications

29
Input/Output Page
Input: xxxxxxxxxxxxx
SRate: yyyyyyyy zzzz
This page is used to set the format and sample rate of the AMM-1’s
input. Use the Cursor button to move between the Input and
Sample Rate fields.
In the Input field, xxxxxxxxxxxxx represents one of the
following input options:
ANALOG Process the signal appearing at the analog
input. The processed signal will appear at the
Analog output. In addition, The AES/EBU
output will contain the processed data on the
left (channel 1) and the negative (180 degree
out of phase) of that data on the right
(channel 2).
Ch1, Ch2 THRU Digital Input. AES/EBU channel 1 is processed,
channel 2 is passed through unchanged.
Ch2, Ch1 THRU Digital Input. AES/EBU channel 2 is processed,
channel 1 is passed through unchanged.
Ch1, Ch2 ZERO Digital Input. AES/EBU channel 1 is processed,
channel 2 is zeroed.
Ch2, Ch1 ZERO Digital Input. AES/EBU channel 2 is processed,
channel 1 is zeroed.
In the Sample Rate field, yyyyyy represents one of the following
sample rate options:
44100 44.1 kHz
48000 48.0 kHz
DIGTL IN Detects the sample rate of the signal at the digital
input and slaves the system clock to that signal.
This field is only editable when ANALOG is selected in the Input
field.
The zzzz field displays the sample rate detected at the digital
input. If the digital input is not used, the field is blank. When one of
the digital input options is selected or DIGTL IN is selected with an
analog input, zzzz will display one of the following:
System Edit: Input/Output Page