Specifications

When you select a model that has previously been marked as de-

leted, the top line of the display will read:

<Enter> to: restore

Pressing the Enter button at this point will restore the model to

active status. It will once again appear in the appropriate mic

selection list and will not be subject to erasure during the FLASH

compression process.

Note: The Source and Model versions of each mic may be indi-

vidually set to active or deleted status. For example, if you

download a model of a mic that you don’t physically own, you

might decide to delete the Source version (since you won’t be

choosing it as a Source mic) but leave the Model version active

so that you can choose it as a modeled mic.

FLASH Info Page

Active models: 47%

Deleted models: 12%

This screen displays the percentage of FLASH that is used by active

and deleted models respectively. If these numbers are added, and in

turn subtracted from 100, the result is the percentage of FLASH that

is unused.

For example, the data in the screen above shows that 59% of the

flash is currently used, with 41% available for future downloads.

Compress FLASH Page

Press Enter to erase

deleted FLASH models

Here’s where the models that you marked Deleted back up in the

Delete/Restore FLASH Models Page can be physically removed from

FLASH to make room for other models. Simply navigate to this page

and press the Enter button. All Deleted models will be removed and

the FLASH will be defragmented. Depending on the number of

models to be removed, compressing may take as long as 45 seconds.

During this time, the message ...working... will appear on

the display.

System Edit