User`s manual

Controls: Input Section

Output

For setting the output level of the processed audio.

The use of each of the individual controls is covered below.

Controls

Input Section

The Input Gain slider, as is no doubt obvious, is

used to set the level of the incoming audio. The

exact amount of gain or attenuation is displayed

numerically above the slider. In most instances, the

input gain should be set at the highest level that

does not cause the 0 dB “LED” of the graphic level

meter to light.

The Level Meter displays the level of the audio as it

is being processed by both the Source and Modeled

Mic models. Because some models (or combinations

of models) can result in increased amplitude at

various frequencies, changing to a different mic

model or changing a model’s settings may require

an adjustment of the Input Gain to avoid clipping.