User Manual

21
Options
Clicking the Options button will
bring up a window containing a
number of settings that fall into the
“set and forget” category.
BUFFER SIZE This controls the number of
seconds of memory buffer space that are
permanently reserved for pitch tracking and
pitch correction data in Graphical Mode.
(There is a separate buffer for each plug-in
occurrence.) To change the buffer allocation,
click in the data field and enter the required
number of seconds.
The maximum buffer length is 14,400 seconds
(i.e., 4 hours).
NOTE: For hosts that provide valid
time information, Auto-Tune Evo will
display all tracked pitch information
at its correct time within the track. If your host
supports this capability, setting the buffer to the
length of the entire song and tracking the pitch
in one pass will allow you to quickly and easily
move to each section of audio to be corrected
as necessary.
NUMBER OF UNDOS Auto-Tune Evo provides
multiple Undo/Redo capability in Graphical
Mode. Select the maximum allowable number
here (up to 20). Choosing a higher number
allocates more memory for saving intermediate
states.
KNOB CONTROL Lets you select how you
want to control the “knobs” in the Auto-Tune
Evo interface.
VERTICAL: Position the cursor over a knob,
press and hold the left mouse button (or
the only mouse button, if you’re using a
one-button mouse) and move the cursor
up to turn the knob clockwise or down to
turn the knob counterclockwise. The current
value of the knob’s parameter appears in its
associated numeric display.
HORIZONTAL: Position the cursor over a
knob, press and hold the left mouse button
and move the cursor to the right to turn the
knob clockwise or to the left to turn the knob
counterclockwise. The current value of the
knob’s parameter appears in its associated
numeric display.
RADIAL: Click anywhere around the
circumference of the knob, press and hold
the left mouse button and “rotate” the
knob in the desired direction. The current
value of the knob’s parameter appears in its
associated numeric display.
USE CUSTOM CURSORS Click the check box
to use Custom Cursors in Graphical Mode.
Normally, Auto-Tune Evo displays different
cursor shapes in the Pitch Graph Display to
help you grab and drag objects (e.g., the object
cursor, the anchor point cursor, etc.). However,
some host applications mistakenly think that
they own the cursor when it is in a plug-in
window. This may cause the cursor to flash as
the host and Auto-Tune Evo alternately try to
set the cursor shape. If this annoys you, unclick
this check box. It will stop the flashing, but you
will no longer see Auto-Tune Evo’s custom
cursors.
DISPLAY VERTICAL LINE AT CURSOR TIME
POSITION
Click the check box to cause
a vertical line to be displayed at the cursor