User Manual

50
The setting of 0 is fast: Auto-Tune Evo
makes instantaneous pitch changes.
The setting of 30 is slower. Auto-Tune
Evo makes gradual pitch changes. This
parameter controls how rapidly the pitch
correction is applied to the incoming pitch.
The units are milliseconds. A value of zero
will cause instantaneous changes from
one tone to another and will completely
suppress a vibrato (note that related volume
changes will remain). Retune values from
10 to 50 are typical for vocals.
To continue:
1. Set the Retune Speed to 0
2. In the Edit Scale Display, click the Remove
buttons next to all the notes except F#.
3. Play “A2-A3-A2 sweep” again. As the
sound is playing, move Scale Detune knob.
The output pitch will be locked to F#, however,
you will hear the output pitch change with the
Detune slider movement. This is because the
Detune knob is changing the pitch standard of
the scale.
Finally:
1. Select “sine wave” from the Vibrato Type
pop-up.
2. Play “A2-A3-A2 sweep” again.
3. Experiment with the various vibrato
controls to hear their effects.