User Manual

38
OUTPUT MIXER SECTION
Here’s where you can set the output levels and
pans of both the processed Audio Signal and the
Control Signal.
Audio Signal
Level
This control
applies gain or
attenuation to
the processed
Audio Signal
plus Noise (if
any). The range
is from -inf (i.e., off) to +12 dBs of gain.
The associated meter indicates the level of the
processed Audio Signal along with a clipping
indicator. Between the effects of the modeling
process and the EQ, it is possible to generate
quite a bit of additional gain. If necessary, adjust
the output level so that clipping is avoided.
To adjust Audio Signal Level, click on the
knob and move the cursor up to turn the knob
clockwise, or down to turn it counterclockwise.
The numeric display will indicate the amount of
attenuation or gain in dBs.
Command (Mac)/Alt (PC) clicking on the knob will
reset it to its default value of 0 dB.
Audio Signal
Pan
This slider allows
you to set the
Audio Signal’s
location in the
stereo spectrum.
NOTE: Audio Signal Pan only
functions in Stereo or Mono ->
Stereo versions of ARTICULATOR
Evo. If you have instantiated a Mono
version, the slider will be disabled.
Command (Mac)/Control (PC) click the control to
reset it to its default value of 0 (absolute center).
Control Signal
Level
This control
applies gain or
attenuation to the
Control Signal.
The range is from
-inf (i.e., off) to
+12 dBs of gain.
The associated meter indicates the level of the
Control Signal along with a clipping indicator. If
necessary, adjust the output level so that clipping
is avoided.
To adjust Control Signal Level, click on the
knob and move the cursor up to turn the knob
clockwise, or down to turn it counterclockwise.
The numeric display will indicate the amount of
attenuation or gain in dBs.
Command (Mac)/Alt (PC) clicking on the knob will
reset it to its default value of -inf (off)
Control Signal
Pan
This slider allows
you to set the
Control Signal’s
location in the
stereo spectrum.
NOTE: Control Signal Pan only
functions in Stereo or Mono ->
Stereo versions of ARTICULATOR
Evo. If you have instantiated a Mono
version, the slider will be disabled.
Command (Mac)/Control (PC) click the control to
reset it to its default value of 0 (absolute center).