User Guide

Auto-Tune Tutorial
36 Auto-Tune UserÕs Manual
8. Press the Make Auto button. Auto-Tune will compute a new curve object
from the existing pitch data:
Assuming this entire phrase is at the pitch E3, then there are several prob-
lem spots, indicated above, where the pitch is being incorrectly adjusted
towards neighboring tones.
9. To hear the processed sound that would produced in Automatic Mode,
set the Graphical Mode Retune Slider to 0, (fast) and play back the
sound.
10.Switch to the Automatic Mode and press the Edit Scale button. Press the
mouse when the cursor is under the “remove” column so that the “chk”
symbol appears next to the tones C, D and F.
11.Switch to the Graphical Mode and use the zoom/select tool to drag out a
selection in the Envelope Graph, as in Step 8.
12.Press the Make Auto button. Auto-Tune will compute a new curve object
from the existing pitch data:
Note how the pitch deviations from Step 9 have been removed. Also, note
the Òraised pitchÓ indicated above. This occurs because the Automatic
Mode Retune slider value of 20 is slow compared to the rapidly increasing
pitch that is occurring at that point in time. Even with the raised pitch, the
average output pitch is centered on E3.
pitch drawn to
neighboring tone