User manual

UPC Universal Power Charger User Manual, Part No 13142-01, 12th October 2007
Page 11
UPC OPTIONS
Remote Temperature and Voltage Sensor
The diagram below shows the method of connection of the sensor. The purpose of the sensor is to
compensate for the voltage drop in the battery supply cables and to compensate for the battery
temperature to ensure that the optimal voltage is applied to the terminals.
Two kits are available which differ in length, 2.5m and 20m and should be selected depending on the
application. See diagram below for installation.
Remote LED Display
The display mimics the lamp on the charger allowing it to be located in an accessible position on the
dashboard or control panel.
Conversion to a Power Supply
The UPC can be used as a constant voltage power supply where no battery is connected. This
requires a change of program and is not configurable by the user. Please contact Antares for more
information or conversion.