HZ-300 HAZER MACHINE USER MANUAL Congratulations on the purchase of your new ANTARI HZ-300 Haze Machine.
User Manual Antari HZ-300 Hazer Congratulations on the purchase of your new ANTARI HAZER. Introduction Thank you for choosing an ANTARI Hazer. You now own a rugged and powerful state-of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Hazer for years to come.
Unpacking & Inspection Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. If any equipment is missing contact your ANTARI dealer immediately. Before beginning initial setup of your ANTARI Hazer, make sure that there is no evident damage caused by transportation. In the event that the unit’s housing or cable is damaged, do not plug it in and do not attempt to use it until after contacting your ANTARI dealer for assistance.
functions by adjusting haze emission duration and interval. Press the yellow TIMERS button to activate the timer function. Adjust the interval between each haze emission (within the range of 10 seconds to 5 minutes) by means of the INTERVAL control knob. Adjust the duration of each haze emission (within the range of 1 to 10 seconds) by means of the DURATION control knob. When pressed, the green MANUAL button activates the hazer, overriding all other function controls.
Important: Never mix oil-based and water-based hazer liquids. Before switching the kind of hazer liquid in use, completely drain the hazer’s tank to avoid mixing. Use only ANTARI Hazer Liquid or other dealer-recommended high-quality hazer fluid . Any other types of fluid can damage the unit.
C08HZ300 8