M-4 Stage Fog Machine User Manual English © 2014 Antari Lighting and Effects Ltd.
Safety Information Please read the following safety information carefully before operating the machine. Information includes important safety information about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed on the machine. If you have questions about how to operate the machine safely, please contact your local Antari dealer for help. Keep this device dry. Always connect to a grounded circuit to avoid risk of electrocution.
Unpacking and Inspection Immediately upon receiving the machine, carefully unpack the carton, check all content to ensure that all parts are present and have been received in good condition. If any parts appear damaged or mishandled from shipping, notify the shipper immediately and retain the packing material for inspection. What is included: 1 x M-4 Fogger 1 x Power Cord 1 x User Manual Product Dimension 385.
Setting Up Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm open space at each side of the machine and 5 meters for the output direction of the machine. Step 2: Fill the fluid tank with Antari fog fluid. Step 3: Connect the machine to suitable rated power supply. To determine the power requirement for the machine refer to the label on the back of the machine.
Control Menu Interval Set Set interval time from 15 to 360 seconds 15 Sec Duration Set Set duration time from 1 to 5 seconds 5 Sec Set DMX address from 1 to 512 DMX512 Add: 1 Turn On/Off W-DMX W-DMX Power Off Rest W-DMX connection W-DMX Reset Off Turn On/Off wireless control Wireless Off Turn On/Off to have a quick start (to run last settings) Quick Start Off DMX Operation Making the DMX Connection – Connect machine to a DMX controller or to one of the machines in the DMX chain.
Pin Function 1 Ground 2 Data- 3 Data+ DMX Channel Function Channel 1 DMX Value Range Function 0–5 Fog Off 6 – 255 100% Fog Output Status of W-DMX connection (Optional) Symbol on the Liquid Crystal Display Status of W-DMX connection ○ Transmitter not assigned ◎ Transmitter assigned, No DMX signal ⊙ Transmitter link lost or linking to transmitter ● Transmitter assigned, DMX signal received Wireless Remote Control Operation (Optional) The wireless remote control system W-1 consists of
With the transmitter, it is possible to emit fog via radio signal at maximum distance of 50 meters. Press the button “A” to emit fog and press the button “B” to stop fogging. *Receiver If the optional wireless remote control function is selected and included, a radio signal receiver is tested and pre-attached on the machine. The included transmitter also has been paired with the attached receiver before shipping.
Step 2: Press and hold [DOWN] button Step 3: Turn power on and release [DOWN] button when LCD display blinks Step 4: Follow the menu instruction to pair or delete transmitter Notes: One machine can be controlled by up to 10 transmitters while one transmiter can be paired with an unlimited number of machines. Fluid Use Antari FLC water-based fluid for the best performance for the M-4 Fogger. The machine is tested and calibrated with this fluid to achieve the best output performance.
Technical Specifications Input voltage 110-120V 60Hz or 220-240V 50Hz Breaker 15A 250V (110V-120V) 8A 250V (220-240V) POWER CONSUMPTION 1500W Warm-up time 5 minutes (approx.) Output distance approx. 5 meters Fluid tank capacity 2.
C08M04000 12
