User manual

8
 Always monitor tank fluid level as you are fogging. Running a fog
machine with no fluid can permanently damage the unit.
 If you experience low output, pump noise or no output at all, remove
the battery immediately. Check fluid level and re-charge the battery.
When the liquid tank is full and the battery is charged, plug the battery
in and press the button on the handle.
 If the machine is still not working and you are unable to determine the
cause of the problem, do not continue pushing the remote button, as
this may damage the unit. Do not open the case. There are no user
serviceable parts inside. Return the machine to an Antari dealer for
service.
Performance Notes
 All fog machines develop condensation around the output nozzle.
Because this may result in some moisture accumulation on the surface
below the output nozzle, consider this condensation when installing
your unit.
 Fog machines may sputter small amounts of fog occasionally during
operation and for a minute or so after being turned off. This is normal
and is not indicative of a defect.
 After continuous operation, the case of the fog machine will become
warm, especially at the front of the machine. Take care in handling
the machine during and shortly after fogging. Only carry the M-1
Mobile Fogger by the handle and let the machine cool down before
packing it in a carrying case.
C08M1