User manual

SETTING UP

Step 1: place the machine on a flat surface and in a suitable large area with at least

50cm open space around the machine.

Step 2: fill the fluid tank with Antari approved fluid

Step 3: connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine

ALWAYS connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat us takes approximately 5

minutes. Once the machine has reached operating temperature, LCD display will

show: READY TO FOG. Now the machine is ready for operation.

Step5: to start making fog, press the VOLUME button on control panel

Step 6: To turn off the machine, press STOP button and turn Powercon to the OFF

position.

OPERATION

Control Panel Operation

The machine can be operated with onboard digital control interface

BUTTON

FUNCTION

Scroll through setting menu

UP / TIMER

UP / activateTimer function

DOWN / VOLUME

DOWN / activate Volume function

STOP

Deactivate Timer / Volume function.