Z-1020 ORDERCODE 60677
Congratulations! You have bought a great, innovative product from Antari. The Antari Z-1020 fogger brings excitement to any venue. You now own a rugged and powerful state-of-the-art machine. You can rely on Antari, for more excellent products. We design and manufacture professional equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied. You can get some of the best quality, best priced products on the market from Antari.
Antari Antari Fogger™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. 2 2 4 Description..…..............................................................................……….………………………………… Features………………………………………………………………………………….………………….…. Overview…………………………………………………………………………………………………..…… Backside…………………………………………………...
WARNING CAUTION! Keep this device away from rain and moisture! Unplug mains lead before filling the tank! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device have to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Only use device indoor, avoid contact with water or other liquids. Only use smoke in well ventilated rooms. Only use the high-quality, water-based fog liquid, that your Antari dealer recommends. (5L fogger fluid ordercode 60603) Other fog liquids may cause poor effect fog, clogging and “spitting” of unevaporated liquid. Avoid flames and do not put close to flammable liquids or gases.
Operating instructions: This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 0,5 meters. The maximum ambient temperature ta = 45°C must never be exceeded. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Description of the device Features The Z-1020 fogger is a small, versatile and yet powerful fogger from Antari. • 1000 W Heater • Warm-up time approx. 4,5 min. • Fog output min. 285m3 • Tank Capacity: 2.5L. • Fluid Consumption Rate: 24 Min./L. (100% Output) • 1 DMX channel • Included: Z-10 Remote Control; Cable length 10m. • Optional Remotes: Z-40 Timer Remote control: Ordercode: 60690 Z-50 Wireless Remote control: Ordercode: 60678 Overview 1 3 2 Fig.
Backside 7 4 5 6 8 9 Fig.
Installation Installing the Fogger Remove all packing materials from the fog machine. Check that all foam and plastic padding is removed, especially in the nozzle area. Fill with Fog Liquid (ordercode 60603) or other high-quality water-based fog fluid. Any other types of fluid can damage the unit. Be careful not to exceed the maximum fluid level. DO NOT OVERFILL. When filled, place cap back on liquid tank.
Optional Remote Control Operation Z-40 Timer Remote control: Ordercode: 60690 Cable Length: 10m Connector: 6,3mm Stereo Jack Function: timer with interval and duration; manual on/off Compatible with: Z-800II, Z-1000II,Z-1020, HZ-100, HZ-300, HZ-400, B-100X, B-200 Z-50 Wireless Remote control: Ordercode: 60678 Cable Length: Wireless, up to 50 m Connector: 6,3mm Stereo Jack Function: Wireless ON/OFF Compatible with: Z-800II, Z-1000II, Z-1020 HZ-100, HZ-300, HZ-400, B-100X, B-200 Z-40 Controls Its two cont
DMX Setting for Z-1020 fog machine with onboard DMX Channel A 129-255 0 – 128 0 - 128 = OFF 129 – 255 = Maximum Volume Output ( 100%) The Z-1020 fog machine has onboard DMX control. Currently this model uses 1 channel to control volume output operation. Each channel has a value range of 0 to 255. On/Off function can be programmed using the DMX controller or the DMX control software being used by lighting and effects operator. If Channel A has a value from 0 to 128, the unit is OFF.
DMX Dip Switch Setting DMX products must have their own "address" to receive DMX signals. Addresses on the Showtec Z-1020 are set by flipping the appropriate DMX dipswitches. A standard DMX address for a Showtec Z-1020, which has 1 channel is as follow: Z-1020 Unit 1 Unit 2 Unit 3 Unit 4 Address Value 1 2 3 4 DMX Dip Switches "ON" #1 #2 #1 and #2 #3 Explanation: Since each unit has 1 channel, each address advances 1 value (See Address Value above).
DMX Address Quick Reference Chart Dip Switch Position DMX DIP SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=OFF #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=ON #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 #6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 #1 #2 #3 #4 #5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 1 0 0 0 0 1 33 65 97 129 161 193 225 257 289 321 353 385 417 449 481 0 1 0 0 0 2 34
Maintenance The Z-1020 fogger requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Please clean internal components once a year with a light brush and vacuum cleaner. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Product Specification Model: Antari Z-1020 Fogger Voltage: AC 230V-50Hz (CE) Power consumption: 1000W(230V) Warm-up time: approx. 4,5 min. Output: 285m3/min. Tank Capacity: 2.5L. Fluid Consumption Rate: 24 Min./L.(100% Output) 1 DMX channel Dimensions 370x295x135mm Weight: 9,7 kg Included: Z-10 Remote Control; Cable length 10m.
2009 Antari.
