STUDIO SERIES TAKE 4 4U RACKMOUNT CASE User’s Manual
At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec's Computer Enclosures.
rack, please use the clear plastic film that came with the toolbox to cover the ventilation (see picture 3). This can prevent hot air in the cabinet from entering the system and causing heat related system problems. CONNECTING THE USB PORTS Picture 3 You will find two 4-pin connectors on cables attached to the front USB ports. Connect the 4-pin connectors to your motherboard headers so that the USB Power pins match the VCC pins on the connectors.
3.5" DEVICE INSTALLATION With the front bezel facing you, turn the latch and swing the front door. You can see there are two 5.25" and two 3.5" external drive bays. Inside the case there are four 3.5" drive cages. For external 3.5" devices: 1. Locate the external 3.5" drive bays. They are to the right of the 5.25" drive bays. 2. Unscrew the 4 small Phillips head screws located on the front panel around the drive cage. 3. Pull the cage and unscrew the drive bay covers. 4. Install your external 3.5" devices.
Specifications: Size: Rated Voltage: Operating Voltage: 120 x 120 x 25.4 mm DC 12V 10.2V ~ 13.8V Speed Input Current Air Flow - at rated voltage zero static pressure (minimal value) Static Acoustical Pressure - at Noise rated voltage at zero air flow Input Power High 2000RPM 0.24A (max.) 2.24 m³ / min (79 CFM) 2.5mm-H2O 30 dBA (0.10inch-H2O) 2.9 W Medium 1600RPM 0.2A 1.59 m³ / min (56 CFM) 1.5mm-H2O 28 dBA (0.06inch-H2O) 2.4 W Low 1200RPM 0.13A 1.1 m³ / min (39 CFM) 0.9mm-H2O 25 dBA (0.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Technical Support US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2005 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners.
