HCP-1300 Platinum POWER SUPPLY USER’S MANUAL 1
HCP-1300 Platinum Antec’s High Current Pro Platinum series is the pinnacle of power supplies. High Current Pro Platinum is fully modular with a revolutionary 20+8-pin MBU socket for the needs of tomorrow. By using a PSU that is 80 PLUS® PLATINUM certified & ErP Lot 6: 2013, operating up to 94% efficient, you can reduce your electricity bill by up to 25% when compared to many other power supplies.
MODULAR CABLE JACKS There are six 5-pin black jacks and six 16-pin black jacks on the back of your HCP-1300 Platinum PSU. These jacks are for the optional cables that come with your power supply. Caution: Please connect only cables provided with this HCP-1300 Platinum.
80 PLUS® CERTIFICATION 80 PLUS® certification is the most widely recognized independent standard in power supply efficiency. An 80 PLUS® certified power supply uses less energy and generates less heat to stay cooler, run quieter and last longer. The HCP-1300 Platinum has been 80 PLUS® PLATINUM certified to be at least 89% efficient at a wide range of operating loads; this will lower your operating costs and help protect the environment.
TABLE 2 Cable Quantity Connectors Socket Description 1 X1 20-pin & 8-pin 24-pin Motherboard 1 X1 8-pin 8(4+4)-pin ATX12V/EPS12V 1 X1 8-pin 8-pin EPS12V 2 X2 16-pin 8(6+2)-pin PCI-E 3 X2 8-pin 8(6+2)-pin PCI-E 5-pin Molex + FDD X3 1 X1 3 X3 5-pin SATA 1 X3 5-pin Molex 1 X2 2-pin OC Link™ 5
INSTALLATION Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your case manual if you are unsure where the power supply should be installed. Connect the 24-pin main power connector to your motherboard. Connect the 8-pin or 4+4-pin connector for the CPU. If your motherboard has an 8-pin socket with a cover on some of the openings, we recommend that you remove the cover and use the 8-pin connector.
Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied with your PSU. PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient, making the hardwired connector the preferred choice. More powerful cards use multiple connectors, including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on the PSU can be used as either a 6- or 8-pin connector.
Technical Support: www.antec.com/support USA & Kanada 1-800-22ANTEC nasupport@antec.com Europe +49-(0)40-226-139-22 eusupport@antec.com Asia +886 (0)800-060-696 apsupport@antec.com Visit us on Facebook for contests, information & support USA & Canada Europe facebook.com/AntecInc facebook.com/AntecEurope UK facebook.com/AntecUK Australia & New Zealand facebook.com/AntecAU India facebook.com/AntecIndia Israel facebook.com/AntecIsrael Philippines facebook.com/AntecPH Antec, Inc. 47900 Fremont Blvd.