Installation guide

7. Connect the USB cable of CN4 to either a USB pin header on

the motherboard or an external USB port. If you use a moth-

erboard header, check the motherboard manual to make sure

you have the pinout correct. On the USB adapter cable, the

black wire is ground (–) and the red wire is power (+5V).

8. Insert the Multimedia Station Elite receiver into the external

5.25” drive bay and secure it with the supplied mounting screws.

2. Software Installation

Please insert the installation CD and then install the iMEDIAN HD soft-

ware. If you see the “Auto Update” message after your installation, please

update to the newest version. After the installation, you may need to

tune the settings of your system for optimal performance.

Please visit www.soundgraph.com for more information on how to install.