One / One S / One S3 1 User Manual
One / One S / One S3 User Manual Congratulations on your purchase of your Antec One / One S / One S3! When building a PC, it’s important to use hardware you’re comfortable working with. From Antec, the team behind dozens of award-winning enclosures since 1986, comes the One / One S / One S3, the gaming case that gives you everything you need right out of the box at an attractive price. This enclosure is stocked with features you value – USB 3.0, ample cooling and tool-less 5.25” & 3.
Table of Contents Section 1: Introduction 1.1 1.2 1.3 Getting to Know Your Chassis ............................................................................5 Chassis Specifications.........................................................................................6 Included Screws .................................................................................................7 Section 2: Hardware Installation 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 Setting Up ........................................
Section 1 Introduction One / One S / One S3 User Manual 4
1.1 Getting to Know Your Chassis One One S / One S3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 5 3 x 5.25” drive bays 5 x 3.5” drive bays 2 x 2.5” drive bays 1 x 120 mm top exhaust fan (standard) 1 x 120 mm rear exhaust fan (standard) 1 x 120 mm side intake fan (optional) 1 x 120 mm front intake fan (optional) 1 x 120/140 mm bottom intake fan (optional) CPU cutout Motherboard mount: Standard ATX, microATX or Mini-ITX Power supply mount Front ports: 2 x USB 3.
1.2 Chassis Specifications Chassis Type Chassis Color Dimensions Weight Cooling Drive Bays Expansion Slots Motherboard Size Front I/O Panel Mid Tower Black 17.2” (H) x 8.2” (W) x 19.2” (D) 438 mm (H) x 208 mm (W) x 488 mm (D) One: 10.8 lbs / 4.9 kg One S / One S3: 10.4 lbs / 4.
1.3 Included Screws An inventory of all screws and intended usage and quantity is provided here: A. PSU screws (10) B. Motherboard standoffs (3:4 preinstalled) C. Motherboard screw (9) D. 5.25”/2.5” optional drive screw (10) E. Standard fan screws (4) F. Front panel fan screws (2) G. Drive bay rails for 3.5” (5 pairs) H.
Section 2 Hardware Installation One / One S / One S3 User Manual 8
2.1 Setting Up When working in your case, please keep the following in mind: 2.2 Put the case upright on a flat, stable surface so that the rear panel (power supply and expansion slots) is facing you. Handle all components and cards with care. To avoid electrostatic discharge, ground yourself periodically by touching an unpainted metal surface or by using a wrist grounding strap. Before you connect a cable, ensure that both connectors are correctly aligned and oriented.
2.3 Motherboard Installation Before proceeding, check the manual for your CPU cooler to find out if there are steps you must do before installing the motherboard. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the chassis isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel. Make sure you have the correct I/O panel. This case comes with 5 preinstalled motherboard standoffs.
2.4 Installing KUHLER H2O Liquid Coolers The following instructs how to install the Antec KUHLER H2O liquid CPU cooler (620 / 920). For any other CPU coolers, please consult your manufacturer’s installation guide. Caution: Check your motherboard’s CPU socket to ensure its compatibility with the KUHLER H2O. The KUHLER H2O 620 / 920 is compatible with the following CPU sockets: Intel® LGA 1155 / 1156 / 1366 / 2011* AMD® AM2 / AM3 / AM2+ / AM3+ *Your unit may not contain the LGA 2011 mounting bracket.
2.6 External 5.25” Device Installation The One / One S / One S3 can support up to three 5.25” devices. 1. Remove the side panels and front bezel as directed in Section 2.2. 2. Remove the drive bay cover by pressing out on the two small tabs on either side of the cover, then pushing the cover into the front of the bezel. 3. Replace the front bezel on the front of the chassis. 4. Slide your 5.25” drive through the front of the chassis until it lines up flush with the front bezel.
2.7 Internal 2.5” Device Installation There are two 2.5” drive mounting locations in the One / One S / One S3: at the base of the drive cage and a dedicated mount in the middle of the drive cage. To install at the base of the drive cage: 1. Remove the side panels as described in Section 2.2. 2. Secure your drive with the 2.5” screws provided (D in Section 1.3). Your drive will attach at the base of the drive cage at the bottom of the case, with screws affixing from the underside of the case.
2.8 Internal 3.5” Device Installation The One / One S / One S3 includes 5 pairs of 3.5” drive rails. You will need 1 pair per 3.5” drive. 1. Line up the drive rail pins to the sides of your 3.5” drive. Ensure that the squeeze-tabs are aligned on the side of your drive that does not have power or data connectors. 2. Snap the rail into place. 3. Repeat steps 1-2 for the other side of the 3.5” drive. 4. Pinch the ends of the drive rails together and slide the drive into the 3.
Section 3 Front I/O Ports One / One S / One S3 User Manual 15
3.1 USB Ports One / One S3: The One and One S3 come with two front panel USB 3.0 ports and includes an internal motherboard connector. Connect these in the same way you would a standard front panel with an internal header connector. One S: The One S comes with two front panel USB 2.0 ports. Connect these in the same way you would a standard front panel with an internal header connector. 1 2 9 10 Pin Signal Names Pin Align the connector properly to prevent damage to your motherboard.
3.3 Power Switch / Reset Switch / Hard Disk Drive LED Connectors Connected to your front panel are LED leads for power and HDD activity, as well as switch leads for the power and reset buttons. Attach these to the corresponding connectors on your motherboard. Consult your motherboard manual for specific pin header locations. For LEDs, colored wires are positive ( + ). White or black wires are negative ( – ). If the LED does not light up when the system is powered on, try reversing the connection.
3.4 Rewiring Motherboard Header Connections There may come a time when you need to reconfigure the pin-out of a motherboard header connector. Examples could be for your USB header, audio input header, or some other front panel connector such as the Power Button connector. Before performing any work, please refer to your motherboard user’s manual or your motherboard manufacturer's website to confirm the pin-out needed for your connector.
Section 4 Cooling System One / One S / One S3 User Manual 19
4.1 Included Fans One: The One comes with two standard fans (yellow outline) – a rear 120 mm exhaust fan and a top 120 mm exhaust fan. The red rectangles indicate additional fan mounts. Mounting procedures for these fans is discussed in Section 4.2. One fan locations One S / One S3: The One S and One S3 come with one standard fan (yellow outline) – a top 120 mm blue LED exhaust fan. The red rectangles indicate additional fan mounts. Mounting procedures for these fans is discussed in Section 4.2.
4.2 Optional Fans One: The One includes mounts for up to three more fans. These mounts are as follows: - 1 x front intake 120 mm mount - 1 x side 120 mm mount - 1 x bottom 120/140 mm mount One S / One S3: The One S / One S3 includes mounts for up to four more fans. These mounts are as follows: - 1 x front intake 120 mm mount - 1 x side 120 mm mount - 1 x bottom 120/140 mm mount - 1 x rear 120 mm mount Front intake 120 mm fan 1. Remove the front bezel as outlined in Section 2.2. 2.
Bottom 120/140 mm fan At the base of the case, there is a fan mount that can fit either a 120 mm or 140 mm fan for additional air intake. 1. Remove the left side panel as outlined in Section 2.2. Rest the case on its side so you have access to both sides of the fan mount. 2. Align your fan with the mounting holes. The fan should be installed on the inside of the case, with air blowing in. 3. Screw in the fan with the included screws (H in section 1.3).
Antec, Inc. 47900 Fremont Blvd. Fremont, CA94538 tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +49-40-226139-22 fax: +31 (0) 10 437-1752 Technical Support US &Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2012 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners.