SLK1650-QE User’s Manual
At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. 2.
etc. or any other function supported by your motherboard, expansion cards, and peripherals. Connecting the USB ports You'll find two 5-pin internal USB connectors (on separate cable sets) attached to the front USB connectors. Here's how to connect the internal USB connector to your motherboard headers: 1. 2.
You could also install an 80mm intake fan between the air guide and the case's side panel. This will further improve your system's cooling airflow. To 1. 2. 3. 4. mount the optional fan between the chassis air guide and the side panel: Remove the chassis air guide from the side panel. Attach the fan to the side panel (see Figure 1). Using the fan screws, lock the flange of the air guide to the fan (see Figure 2).
SLK1650-QE Quiet Black Mid Tower Case 1 2 4 3 Drawing Number 17 Description 16 1 Top Panel 15 2 Rear 120mm Fan blowhole 14 3 Left Side Panel 4 Front Bezel 5 5.25” Drive Bay Cover 6 3.5” Drive Bay Cover 7 Front USB Ports 8 Plastic Feet 9 Lower 3.5” Drive Cage 10 Upper 3.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands tel: +31 (10) 462-2060 fax: +31 (10) 437-1752 Technical Support: US & Canada 1-800-22ANTEC techsupport@antec-inc.com Europe +31 (10) 462-2060 europe.techsupport@antec-inc.com www.antec-inc.com © Copyright 2004 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners.
