User`s manual

10
2.5 E XTERNAL 3.5” D RIVE B AY D EVICE I NSTALLATION
The Sonata III 500 provides space for two external 3.5”
devices. Before you begin, remove the side panel as described
in section 2.1.
1. With your thumb and forefinger, grasp the pinch tabs on
either side of one of the external 3.5” drive trays, and
slide the drive tray outwards.
2. Remove the screws from the top or bottom panel of the
external 3.5” drive tray. Gently pinch together the sides
of one of the drive tray’s drive covers and remove it from
the drive tray.
3. Place your 3.5”device in the tray. Using the screws
provided with the drive tray, securely fasten your
3.5” device to the tray.
4. Place the 3.5” external drive tray assembly
containing your 3.5” device into the front panel,
and push until it clicks.
5. Attach power and motherboard cables to the device
as necessary.
2.6 E XTERNAL 5.25” D RIVE B AY D EVICE I NSTALLATION
The Sonata III 500 provides space for three external 5.25”
devices. Before you begin, remove the side panel as described
in section 2.1.
1. With two forefingers, press the pinch tabs on either side
of one of the external 5.25” drive covers and pull the
cover out of the case.
2. Slide your 5.25” device into the drive bay, making sure to
engage the 5.25” drive tray rails on either side of the
bay.
3. Connect the power and motherboard cables to your
5.25” device.