User Manual

Zen Tour Synergy Core User Manual 22
Front Panel
Left to right:
Headphone outputs 1 and 2
2 stereo headphone outputs on 1/4-inch TRS jacks.
Re-amp outputs 1 and 2
Transformer-based outputs for sending direct signals to guitar amplifiers and other
equipment suitable for re-amping 'dry' tracks.
Note: Technically, you can use the REAMP outputs as Sends for external equipment,
though this is ‘off label’ and results may vary. Audio is output at instrument-level, which is
significantly quieter than line-level and typically requires a preamp for amplification.
Hi-Z inputs G1 - G4
4 Hi-Z inputs on 1/4-inch TS jacks. For recording electric guitars and other instruments
with high output impedance. Use TS instrument cables.