User Manual

Zen Tour Synergy Core User Manual 61
Recording and Monitoring Verge
Verge is a single-membrane, small-diaphragm condenser microphone. This means the
microphone will occupy one physical mic preamp input, one block in the Routing Matrix
‘PREAMP’ row and one block in the ‘MIC EMU’ row.
Verge mic emulations work on a single input audio channel. Recording and monitoring both
‘dry’ and ‘mic emulation’ audio means dealing with two mono tracks simultaneously.
● Route the ‘PREAMP’ input for Verge to your desired outputs to monitor ‘dry’ audio.
Route to a ‘COMP REC’ block to record from the corresponding input in your DAW.
● Route the ‘EMU MIC’ output for Verge (same number as the ‘PREAMP’ input) to
your desired outputs to monitor ‘mic emulation’ audio. Route to a ‘COMP REC’ row
to record from the corresponding input in your DAW.
● Route ‘PREAMP’ and ‘EMU MIC’ blocks to your desired outputs and ‘COMP REC’
inputs to monitor and record both ‘dry’ and ‘mic emulation’ audio.
For more information about Verge, visit its
product page.
AFX2DAW
Available as a separate purchase, AFX2DAW is a bridge plug-in for using Synergy Core FX
as inserts in your DAW. All Synergy Core FX processing and I/O audio streaming activity is