User Manual
Table Of Contents
- Before you begin
- Online activation INSTRUCTIONS
- SETTING UP
- THUNDERBOLT™ 3 FUNCTIONALITY
- ANTELOPE LAUNCHER
- HARDWARE Panels Explained
- CONTROL PANEL APPLICATION
- Edge & Verge mic emulations
- CUSTOMER SUPPORT INFORMATION
- MY ANTELOPE AUDIO PRODUCT ISN’T WORKING.
- LIMITED WARRANTY POLICY
- SAFETY NOTES
- TECHNICAL SPECIFICATIONS
Antelope Audio Zen Q Synergy Core User Manual
Page 11
5. Enter the ‘Enhancements’ tab and disable all enhancements.
6. Enter the ‘Advanced’ tab and choose any of the available “2 channel, 24-bit” modes from
the drop-down menu. Click ‘OK’ to close the window.
7. Back in Sound settings, click 'Device Properties' under 'Input'. Then, click 'Additional Device
Properties'. Enter the 'Enhancements' tab and disable all enhancements. Click 'OK' to close
the window.
Tips
● If you are experiencing interruptions or failure when using your DAW and trying to
playback audio from your OS at the same time, make sure that the device sample rate
matches the one of your DAW session.
● In some cases, disabling the ‘Exclusive mode’ functionality from the ‘Advanced’ tabs
might help when running multiple playback applications at the same time.
● Disabling the 32kHz sample rate isn’t mandatory, but it might help in general.
Further Reading
●
Antelope Audio Knowledge Base - Windows 10 Optimization
Configuring for macOS (10.14 and later)
The security settings in macOS (10.14 and later) may result in no input signal reaching your
DAW, despite having everything set up correctly.