User Manual
Table Of Contents
- Before you begin
- Online activation INSTRUCTIONS
- SETTING UP
- THUNDERBOLT™ 3 FUNCTIONALITY
- ANTELOPE LAUNCHER
- HARDWARE Panels Explained
- CONTROL PANEL APPLICATION
- Edge & Verge mic emulations
- CUSTOMER SUPPORT INFORMATION
- MY ANTELOPE AUDIO PRODUCT ISN’T WORKING.
- LIMITED WARRANTY POLICY
- SAFETY NOTES
- TECHNICAL SPECIFICATIONS
Antelope Audio Zen Q Synergy Core User Manual
Page 59
Edge Solo mic emulations work on a single input audio channel. Recording and monitoring
both ‘dry’ and ‘mic emulation’ audio means dealing with two mono tracks.
• Route the ‘PREAMP’ input for Edge Solo to your desired outputs to monitor ‘dry’ audio.
• Route the ‘EMU MIC’ output for Edge Solo (same number as the ‘PREAMP’ input) to
your desired analog and digital outputs to monitor/record ‘mic emulation’ audio.
• Route ‘PREAMP’ and ‘EMU MIC’ channels to different outputs and record or monitor
from them to get both 'dry' and 'mic emulation' audio.
For more information about Edge Solo, visit its
product page.
Edge Duo
Note to owners of the legacy ‘Edge’ modeling microphone: 'Edge' and 'Edge Duo' have nearly
identical hardware, so feel free to use the ‘Edge Duo’ emulations with your legacy ‘Edge’ mic.
Edge Duo Mic Emulations Window
The following functionality is available:
• Choose mic emulations from the drop-down menu in the middle.
• Click and turn the ‘Phase Invert’ dial to flip the signal polarity.