User Manual
Table Of Contents
- CONTENTS
- BEFORE YOU BEGIN
- SETTING UP
- ANTELOPE LAUNCHER
- FRONT PANEL EXPLAINED
- REAR PANEL EXPLAINED
- CONTROL PANEL
- Quick Start
- Mouse & Keyboard Shortcuts
- Main View
- Software Re-amping
- Edge Solo
- Edge Duo
- Edge Duo Mic Emulations Window
- Recording and Monitoring Edge Duo
- Recording and monitoring Edge Duo as a single-membrane condenser mic
- Recording and monitoring Edge Duo as a dual-membrane condenser mic
- Recording and monitoring Edge Duo as a modeling microphone
- Recording and monitoring ‘dry’ and ‘mic emulation’ audio simultaneously
- Edge Quadro
- Verge
- ADVANCED USER TIPS
- CUSTOMER SUPPORT INFORMATION
- MY ANTELOPE AUDIO PRODUCT ISN’T WORKING.
- LIMITED WARRANTY POLICY
- Warranty Coverage
- Limited Factory Refurbished (B-stock) Warranty
- Remedies
- Obsolete or Discontinued Products
- Exclusions
- Limitation of Liability
- Data Recovery
- No Other Warranties
- How to Make a Warranty Claim
- Returning Your Product
- Request a Return Material Authorization Number (RMA#)
- RMA Return Addresses
- Products Lost or Damaged During Transit
- Company information
- SAFETY NOTES
- Blank Page
- Getting Started
- Getting Started
- Gain Calibration
- Gain Calibration
Discrete 8 Pro Synergy Core User Manual
Page 37
Play guitar through the virtual amps and cabinets, listening from
studio monitors
1. Connect your guitar to A1 and your studio monitors to the Monitor L/R outputs of the
Discrete 8 Pro Synergy Core.
2. Open the Control Panel and head to the leftmost area in the 'PREAMPS' row. Click the
middle symbol to the right of the volume indicator until you get an electric guitar
symbol.
3. Go to the ‘AFX’ tab and select ‘PREAMP 1’ on any available channel, we’ll use the first
effects rack for this example.
4. Click the area below the input selector to launch the Synergy Core FX Rack. Click
'ADD NEW EFFECT' and make your guitar amp and cabinet choices from the menu. If
you don't know where to start, the 'Modern (US)' amp and 'Modern 4 x 12' cabinet
combination make for a great modern rock/metal rig.
An in-depth overview of the cabinet simulator is available later in the manual. You can
learn more about the individual amp models here and about the cabinets here.
5. Select ‘AFX OUT 1’ as a source on an available mixer channel. We’ll use the first
channel of ‘MIXER 1’ for this example. Afterwards open the ‘MONITOR 1’ tab on the
bottom of the control panel and select the two outputs of ‘MIXER 1’ for the left and right
speakers. Adjust panning and volume to taste from the mixer settings and the monitor
output volume from the volume knob in the ‘MONITOR 1’ tab.
Sing with microphone emulations and monitor live with
headphones
Connect your headphones to HP1 on the front panel. Connect your Antelope Audio Edge
or Verge modeling microphone to the preamp/combo inputs. In our example, we are
using the Edge Duo, which is connected to inputs A1 and A2.
1. Open the Control Panel and head to the leftmost preamp from the PREAMPS row.
Click the middle symbol to the right of the volume indicator until you reach the 'mic'
symbol. Then, click the 'cog wheel' symbol. This will launch the mic emulations window.
Choose Edge Duo with the dial.
2. Adjust microphone gain with the gain knobs. Note that preamps A1 and A2 are now
linked and have identical settings between them.
3. Go to any available mixer, ‘MIXER 1’ in this example, and select ‘EMU MIC 1’ and ‘EMU
MIC 2’ as sources for the first two, or any other mixer channels.
4. Open the ‘HEADPHONES 1’ tab on the bottom of the control panel and make sure the
outputs of the first mixer are selected from the left and right channel dropdown menus,
‘MIXER 1 OUT 1’ and ‘MIXER 1 OUT 2’ respectively.