User Manual

Discrete 8 Pro Synergy Core User Manual
Page 42
Monitor Out Trim
Click to choose the signal trim amount (in
dBu) for the Monitor Outputs from the
drop-down menu.
Panning Law
Click to specify Panning Law
compensation between 0dB (none) to -
4.5dB from the drop-down menu.
TBK Input
Click to change Talkback input from the
internal mic to any microphone connected
to mic/line inputs A1 - A8.
TBK HP1
Click to send Talkback input to
Headphone output 1 (HP1).
TBK HP2
Click to send Talkback input to
Headphone output 2 (HP2)
TBK Mon
Click to send Talkback input to the
monitor outputs.
Mute Mutes Oscillator 1 output.
Oscillator 1
Choose a frequency for the Oscillator 1
test signal from the drop-down menu.
Level
Choose the output level (in dBFS) for the
oscillator 1 & 2 test signals.
Oscillator 2
Choose a frequency for the Oscillator 2
test signal from the drop-down menu.
Mute Mute Oscillator 2 output.
Line Out Volume
Use the fader to adjust line outputs
volume (in dB). Click the adjacent 'Mute'
button to mute and unmute the line
outputs.
Brightness
Use the fader to adjust the hardware
unit's display brightness.
TB Latency Mode
Choose the Thunderbolt Latency mode
from the drop-down menu. Experiment
with the different modes if you