User Manual

Discrete 8 Pro Synergy Core User Manual
Page 45
route DAW audio to the internal mixers, analog and digital
outputs and apply Synergy Core FX to it.
ADAT IN 1 - 16 ADAT audio inputs 1 - 16.
S/PDIF IN 1 - 2 Two channels of incoming S/PDIF stereo digital audio.
AFX OUT 1 – 16
The processed output signal from the AFX channels.
Whichever source you put in the AFX channels, you
receive a processed signal with added effects.
MIXER 1 - 4 OUT
The summed output signal from each 32-channel mixer.
Each output is stereo left and right (for example MIXER 1
OUT 1 and MIXER 1 OUT 2)
MUTE M Choose to mute this channel
OSCILLATOR 1 - 2 Test signal from oscillator 1 or 2.
Main tabs
The main tabs in the Control panel give you access to the essentials:
• Mixers – gives you access to navigate between the 4 individual MIXERS
which will show up on the right side of the same row
• Digital outs – allows you to route signals to the ADAT and S/PDIF outputs.
• Line outs – allows you to route signals to the D-sub line outputs and adjust their
volume.
• DAW – allows you to route signals for recording into your DAW
• AFX – add effects for each channel strip and select the source you want to
process.
• Routing – gives you access to the routing matrix.
• Auraverb – gives you access to the settings of the Auraverb reverb effect.
• Monitoring control – gives you access to routing and adjusting volume on the
Monitor and Headphone outputs.
For an in-depth explanation on each tab, please continue reading.