User Manual

Discrete 8 Pro Synergy Core User Manual
Page 64
● Click and turn the ‘Phase Invert’ dial to flip the microphone’s polarity.
● Click and drag the ‘48’V switch to activate or turn off phantom power.
Recording and Monitoring Edge Solo
Edge Solo is a single-membrane condenser microphone. This means the microphone will
occupy one physical mic preamp input and one virtual ‘EMU MIC’ channel.
Edge Solo mic emulations work on a single input audio channel. Recording and
monitoring both ‘dry’ and ‘mic emulation’ audio means dealing with two mono tracks.
● Route the ‘PREAMP’ input for Edge Solo to your desired outputs to monitor ‘dry’
audio.
● Route the ‘EMU MIC’ output for Edge Solo (same number as the ‘PREAMP’ input)
to your desired analog and digital outputs to monitor/record ‘mic emulation’
audio.
● Route ‘PREAMP’ and ‘EMU MIC’ channels to different outputs and record or
monitor from them to get both 'dry' and 'mic emulation' audio.
For more information about Edge Solo, visit its product page.